The conveyor belt of the external line machine works under high load conditions for a long time, and the surface is prone to dust and debris. If it is not cleaned in time, it will be severely worn. Today, let us talk about how to clean the conveyor belt of the external line machine.
Before cleaning the conveyor belt of the external line machine, we need to adjust the sensitivity of the needle detector to make it reach a suitable position. "Then, we need to straighten the towel, press it correctly on the surface of the conveyor belt of the external line machine, turn on the external line machine, and run more than five laps to better clean the dirt on the surface of the conveyor belt. Then we wash the towel dry and repeat Clean step until there is no obvious dirt on the conveyor belt of the external line machine.
He said: "The rear of the conveyor belt of the external line machine must also be cleaned. To clean the back of the conveyor belt, the metal shells at the left and right ends of the conveyor belt must be removed and wiped with a clean towel. After the end, turn on the external line machine for several weeks. "Because the bottom of the conveyor belt of the external line machine is very dirty, it needs to be wiped several times, so the above cleaning steps need to be repeated many times.
